Gps Data - Nokia N97 mini User Manual

Add to category — Add a landmark to a category in
Landmarks. Select each category to which you want to add
the landmark.
Send — Send one or several landmarks to a compatible
device. Your received landmarks are placed in the Inbox
folder in Messaging.
You can sort your landmarks into preset categories, and
create new categories. To edit and create new landmark
categories, open the categories tab, and select
Edit categories.

GPS data

Select Menu Applications
>
GPS data is designed to provide route guidance information
to a selected destination, position information about your
current location, and travelling information, such as the
approximate distance to the destination and the
approximate duration of travel.
The coordinates in the GPS are expressed using the
international WGS-84 coordinate system.
To use GPS data, the GPS receiver of your device must initially
receive position information from at least four satellites to
calculate your location. When the initial calculation has been
made, it may be possible to continue calculating your
location with three satellites. However, the accuracy is
generally better when more satellites are found.
Options
Location and GPS data.
>
Route guidance
Select Menu Applications
>
Navigation.
Start the route guidance outdoors. If started indoors, the GPS
receiver may not receive the necessary information from the
satellites.
Route guidance is designed to show the straightest route and
the shortest distance to the destination, measured in a
>
straight line. Any obstacles on the route, such as buildings
and natural obstacles, are ignored. Differences in altitude are
not taken into account when calculating the distance. Route
guidance is active only when you move.
To set your trip destination, select
destination and a landmark as the destination, or enter the
latitude and longitude coordinates.
To clear the destination set for your trip, select
navigation.
Retrieve position information
Select Menu Applications
>
Position.
In the position view, you can view the position information
of your current location. An estimate of the accuracy of the
location is displayed.
To save your current location as a landmark, select
Options Save position. Landmarks are saved locations
>
with more information, and they can be used in other
Positioning (GPS)
Location and GPS data
>
Options Set
>
Stop
Location and GPS data
>
81
>
>