Nokia N97 mini User Manual page 67

For example, you can add wireless LAN (WLAN) and packet
data access points to an internet access point group, and use
the group for browsing the web. If you give WLAN the highest
priority, the device connects to the internet through WLAN,
if available, and through a packet data connection if not.
To create a new access point group, select
Manage New destination.
>
To add access points to an access point group, select the
group and Options New access
>
access point from another group, select the group, tap the
relevant access point if it is not already highlighted, and
select Options Organise
>
To change the priority of an access point within the group,
select Options Organise
>
Packet data access points
Select Menu Settings
>
Destinations Access point, and follow the instructions on
>
the screen.
To edit a packet data access point, open one of the access
point groups, and select an access point marked with
Follow the instructions from your service provider.
Select from the following:
Options
point. To copy an existing
Copy to other dest..
>
Change priority.
>
and Connectivity
>
Access point name — You obtain the access point name
from your service provider.
User name — The user name may be needed to make a data
connection, and is usually provided by your service provider.
Prompt password — If you must enter the password every
time you log in to a server, or if you do not want to save your
>
password in the device, select Yes.
Password — A password may be needed to make a data
connection and is usually provided by your service provider.
Authentication — Select
password encrypted or
encrypted when possible.
Homepage — Depending on the access point you are setting
up, enter the web address or the address of the multimedia
message centre.
Use access point — Select
the device to ask for confirmation before the connection
using this access point is created, or
want the device to connect to the destination using this
access point automatically.
Select Options
following:
Network type — Select the internet protocol type to transfer
.
data to and from your device. The other settings depend on
the selected network type.
Phone IP address (for IPv4 only) — Enter the IP address of
your device.
DNS addresses — Enter the IP addresses of the primary and
secondary DNS servers, if required by your service provider.
Secure to always send your
Normal to send your password
After confirmation
Automatically
Advanced settings and from the
>
Connectivity 67
if you want
if you