Nokia N97 mini User Manual page 134

134 Troubleshooting
point, or not scanning for available networks. To further
reduce battery consumption, you can specify that your Nokia
device does not scan, or scans less often, for available
networks in the background. The WLAN is deactivated in
between background scans.
To change the background scan settings, do the following:
1 Select Menu Settings
>
2 To increase the background scan time interval, adjust the
time in Scan for networks. To stop background scans,
select Show WLAN availability
3 To save your changes, select Back.
When Show WLAN availability
WLAN availability icon is not displayed in the home
screen. However, you can still manually scan for available
WLAN networks, and connect to WLAN networks as usual.
Q: What do I do if the memory is full?
A: Delete items from the memory. If
to perform operation. Delete some data first.
low. Delete some data from phone memory.
when you are deleting several items at the same time, delete
items one by one, beginning with the smallest items.
and Connectivity > WLAN.
> Never.
is set to Never, the
Not enough memory
or Memory
is displayed
Q: Why can't I select a contact for my message?
A: The contact card does not have a phone number, address,
or e-mail address. Select
contact, and edit the contact card.
Q: How can I end the data connection when the device
starts a data connection again and again?
A: The device may be trying to retrieve a multimedia message
from the multimedia message centre. To stop the device from
making a data connection, select
Options Settings Multimedia message
> >
retrieval. Select Manual
centre save messages to be retrieved later, or
all incoming multimedia messages. If you select Manual, you
receive a notification when you have a new message in the
multimedia message centre. If you select Off, the device does
not make any network connections related to multimedia
messaging.
To set the device to use a packet data connection only if you
start an application or action that needs it, select
Settings and Connectivity
data Packet data connection
>
If this does not help, switch the device off and then on again.
Menu Contacts and the relevant
>
Menu Messaging
>
Multimedia
>
to have the multimedia messaging
Off
Admin. settings
> >
When needed.
>
and
to ignore
Menu
>
Packet