Connecting To A Pc - Panasonic HX-DC2 Operating Instructions Manual

With a PC

Connecting to a PC

≥ Connect this unit to the PC after the software applications are installed.
≥ Remove the supplied CD-ROM from your PC.
A USB cable (supplied)
≥ Insert the plugs as far as they will go.
1
Turn on the unit.
≥ Be sure to use a sufficiently charged battery.
≥ This function is available in all modes.
2
Connect this unit to a PC.
≥ The USB function selection screen will appear.
3
Select the desired connection mode using the SET
button and press the SET button.
[CARD READER]:
[WEB CAMERA]:
∫ To disconnect USB cable safely
Select the
[Eject Panasonic Camcorder].
≥ Depending on your PC's settings, this icon may not be displayed.
The unit works as an external drive for the PC.
(Card reader mode) (l 124)
The unit works as a web camera. (Web camera
mode) (l 127)
icon in task tray displayed on the PC, and then click
- 123 -