Microprocessor Control - Mitsubishi Electric Mr. Slim MSZ-GE06NA Service Manual

8

MICROPROCESSOR CONTROL

MSZ-GE06NA MSZ-GE09NA MSZ-GE12NA MSZ-GE15NA MSZ-GE18NA
MSY-GE09NA MSY-GE12NA MSY-GE15NA MSY-GE18NA
WIRELESS REMOTE CONTROLLER
Signal transmitting section
Operation display section
OPERATE/STOP
(ON/OFF) button
Temperature buttons
NOTE: Last setting will be stored after the unit is turned OFF with the remote controller. Indoor unit receives the signal of the
remote controller with beeps.
INDOOR UNIT DISPLAY SECTION
Operation Indicator lamp
The operation indicator at the right side of the indoor unit indicates the operation state.
• The following indication applies regardless of shape of the indication.
Indication
The unit is operating to
reach the set temperature
The room temperature is
approaching the set tem-
perature
Standby mode
(Only during multi system
operation)
FAN SPEED CONTROL button
OPERATION SELECT button
Indication of
remote controller
model is on back
Operation state
About 4°F(2°C) or more
away from set tempera-
ture
About 2 to 4°F(1 to 2°C)
from set temperature
E.g.: MSZ type
ECONO COOL button
VANE CONTROL button
SMART SET button
RESET button
Room temperature
-
10
OFF TIMER button
ON TIMER button
TIME SET buttons
FORWARD button
BACKWARD button
CLOCK SET button
Lighted
Blinking
Not lighted