Sony KV-36FS12 Operating Instructions Manual page 14

Installing the TV
Back Panel Descriptions
Connection Description
[_AUX Allows you to view local and cable channels il your cable
mxcepl provider does not feature local channels. You can switch
KV-36ES12) between local and cable channels easily by pressing ANT
on the remote control. Devices connected to the AUX
input cannot be viewed in PIP
[] TO CONVERTER This is a VHF/UHF out jack that lets you se[ up your TV
1except to switch between scrambled channels/through a cable
KV-36FS 121 boxl and normal cable channels tCATV! Use this jack
instead of a splitter to get better picture quality when
needing to switch between scrambled and unscrambled
cable channels.
[_VHF/UHF Connects to your VHF/UHF antenna or cable.
[] S VIDEO Connects to the S VIDEO OUT jack of your VCR or other
S VIDEO-equipped video component. Provides better
picture quality than the VHF/UHFjacks or the Video 1N
jack.
Lets you record the program you are watching to a VCR.
When two VCRs are connected tsee page 17), you can
use your TV as a monitor for tape-to-tape editing
[] MONITOR OUT
lexcept models
KV-36FS12 and
36FS16,
[]AUDIO (UR)I
VIDEO
Connects to the audio and video OUT jacks on your VCR
or other video component. A third video input IVIDEO
21 is located on the front panel of the TV. The Audio and
Video IN jacks provide better picture quality than the
VHF/UHF jack.
[_AUDIO OUT Connects to the left and right audio inputs of your audio
(VAPJFIX) or video component. You can use these outputs to listen
L/MONOltR to your TV's audio through your stereo system
[] S-LINK Allows the TV to receive/IN} and send lOUT} remote
CONTROL S IN/OUTcontrol signals to other Sony infrared-controlled audio or
1except models video components
KV-36FS12 and
36FS16,
[] Y.PB.PR.L R Connects to your DVD player's or Digital Set-top box's
component video Y. PB. PRI and audio/L/R/jacks.
9