Setting Up The Tv Automatically - Sony KV-36FS12 Operating Instructions Manual

Installing the TV
Setting Up the TV Automatically
After you finish connecting your TV, you need to run Auto Setup to
set up your channels. The Auto Setup screen appears when you turn
your TV on for the first time after installing it. If you do not want to
set up the channels at this time. you can do it later by using the Auto
Program feature in the Channel menu see pages 40 and 41
Using Auto Setup
1
Press POWER to turn on the TV.
2 Press the TV function button on the remote control.
3 Press CH+on the front of your TV to run the Auto Setup or press
CH- to exit. If you use the channel buttons on your remote control
be sure to use the main set of buttons
Ib reset your TV to factoi T settings, turn the TV on. Then while
pressing the RESET button on the remote control, press the POWER
button on the TV.The TV will turn itself off. then back on.
26