Sony KV-36FV300 Operating Instructions Manual page 11

Button Description
[] POWER Press to turn on and off the TV and other audio/video
buttons equipment you have programmed into the remote control.
For instructions, see "Programming the Remote Control"
on page 49.
[] FUNCTION Press to select the equipment (TV, VCR/DVD, SAT/
buttons
CABLE) that you want to operate with the remote control.
The indicator (LED) lights up momentarily when pushed
to show which device the remote control is operating.
[] TV/VIDEO Press to cycle through available video inputs.
[] ANT Press to change between the VHF/UHF input to the AUX
(anten ha) input, press again to switch back.
[] (_)-(_) and Press to change channels directly. The channel changes
ENTER after 2 seconds.
See "Using Picture in Picture (PIP) with Remote Y182" on
[] _ page 26 for details.
[] (_ See "Using Picture in Picture (PIP) with Remote Y182" on
page 26 for details.
[]
GUIDE
Press to display the program guide of your satellite
antenna.
[] CH (channel) Press to change channels. To scan rapidly through the
channels, press and hold down the CH+ or CH- button.
[]
RESET
Press to return to the factory settings while in an on-screen
menu.
[] AV12 3 DVD Use to switch control for connected video equipment. You
can program one video source for each switch position.
(_ For details, see "Programming the Remote Control" on
page 49.
6