Makita 9556PB Instruction Manual page 5

FUNCTIONAL
DESCRIPTION
1
1. Shaft lock
1
2
1. Lock-off lever
2. Switch lever
3. Lock button
ASSEMBLY
CAUTION:
• Always be sure that the tool is switched off and unplugged before
adjusting or checking function on the tool.
Shaft lock
006111
CAUTION:
• Never actuate the shaft lock when the spindle is moving. The tool may be
damaged.
Press the shaft lock to prevent spindle rotation when installing or removing
accessories.
Switch action
006112
CAUTION:
• Before plugging in the tool, always check to see that the switch lever
actuates properly and returns to the "OFF" position when released.
• Do not pull the switch lever forcibly without pushing in the lock-off lever.
For tool with lock button
3
To prevent the switch lever from being accidentally pulled, a lock-off lever is provided.
To start the tool, pull the lock-off lever toward the operator and then pull the
switch lever. Release the switch lever to stop. For continuous operation, pull
the switch lever and then push in the lock button. To stop the tool from the
locked position, pull the switch lever fully, then release it.
For tool without lock button
To prevent the switch lever from accidentally pulled, a lock-off lever is provided.
To start the tool, pull the lock-off lever toward the operator and then pull the
switch lever. Release the switch lever to stop.
CAUTION:
• Always be sure that the tool is switched off and unplugged before
carrying out any work on the tool.
Installing side grip (handle)
006113
CAUTION:
• Always be sure that the side grip is installed securely before operation.
Screw the side grip securely on the position of the tool as shown in the figure.
5