Table of Contents
Advertisement
MAIN MENU
Parental Control
To open this menu you will be asked to enter your access code.
From the factory the access code is set to 1234.
The following settings can be altered from this menu.
Receiver lock
If you select "On," you will have to enter the access code every
time you start the DMP from standby.
Age Rating Control
If you want everybody to have access to all available types of pro-
grammes, select "Off."
If you select "On," you may block programmes unsuitable for
children. Select an age limit between 4 and 18 years on the line
that appears.
However, you should be aware that not all Service Providers have
the necessary codes for these functions implemented in their
transmissions.
Do not use this Age Rating Control function if you are using the
Age Rating Control provided with your Smartcard.
Change access code
From here you can change the access code from the stand-
ard 1234. DO NOT FORGET IT! Without it you do not have ac-
cess to any of the functions where the code is required!
If you forget it, you have to contact an Authorized Nokia
Service Center to get help.
GB 25
Advertisement
Table of Contents
