Connecting To The Telephone Wall Socket; Connecting A Hifi System; Connecting The Ac Power Cord - Nokia 8830 S Owner's Manual

If your TV has a S-Video socket (S-Video cable is not in-
cluded)
• Connect a S-Video cable from the S-Video socket on the DMP
to the S-Video input socket on your TV.
• Connect an RF cable from the RF output socket on the VCR
to the TV aerial input socket on the TV.
• Connect an RF cable from the TV/VCR output socket on the
DMP to the RF input socket on the VCR.
• Connect the Audio cable between the AUDIO L R sockets on
the DMP and the input sockets on the TV.
• Connect the TV aerial directly to the TV AERIAL input socket
on the DMP.

Connecting a HiFi System

• Connect an RCA/Cinch stereo cable from the AUDIO L R sock-
ets on the DMP to the LINE, AUX, SPARE or EXTRA input
sockets on your HiFi system.
Note: To avoid interference you must use a screened au-
dio cable.

Connecting to the Telephone Wall Socket

You will be offered interactive and Pay-Per-View services from
your Service Provider. You may then need to connect the DMP
to a telephone line.
• To connect the modem cable, plug the cable from the DMP
TELEPHONE socket into the splitter (not included).
• Connect the telephone cable to the splitter and the splitter to
the wall socket.
• For best protection of your DMP it is strongly advised that a
surge protection device is installed (Surge protector not in-
cluded).

Connecting the AC power cord

• Connect the AC power cord to the DMP and connect the plug
end to an AC power outlet.
GB 10
Out
VCR
In
RF
RF
Out
In
Audio
S-Video
DMP