Table of Contents
Advertisement
Language (Menu 5-3-1)
Within this menu, you can select the lan-
guage in which the display texts will be
shown - between
Korean
lect
English
to change all the display to
English.
Touch tone length
(Menu 5-3-2)
This function sets the sound length of key
tone made when you pressed number key
in-call. you can set in either
If your phone connected to the Automatic
Response System (ARS) and the relative
system can not recognize the key, you
should set to Long.
Background settings
(
5-3-3)
Menu
This function sets the phrase or graphic
displayed on background display. If you
have downloaded graphic, you can set the
graphic on background display(You can
download up to 5 graphics.).
Idle display (Menu 5-3-3-1)
This function sets the phrase or picture
displayed in the standby mode. If selecting
User input
text, you can input and display
the desired phrase on the standby screen.
Power on (Menu 5-3-3-2)
Sets the picture displayed when you
switch the phone on.
and English. Se-
long
or short.
37
Power off (Menu 5-3-3-3)
Sets the picture displayed when you
switch the phone off.
Incoming call (Menu 5-3-3-4)
Sets the picture displayed when the phone
rings. If you are subscribed to caller ID
service, the picture is not displayed.
NATE connect (Menu 5-3-3-5)
Sets the picture displayed when you ac-
cess NATE.
Display contrast
(Menu 5-3-4)
This function controls display contrast of
the phone. You can set either
or Manual.
Automatic
Select Automatic. The default of the
phone is set.
Manual
1. Select Manual.
2. Scroll with
contrast.
3. Press Ok in the desired contrast.
Auto backlight (Menu 5-3-5)
You can set the time of the phone back-
light on. You can make it that light always
is off in 15 or 10 seconds after entering
the last key.
Automatic
or
to set the
Advertisement
Table of Contents
