– PPPoE(ADSL)
S
ETTINGS
1) Select PPPoE to be assigned automatically from an Internet service provider (ISP)
through a DSL modem using Point-to-Point Protocol over Ethernet (PPPoE).
2)
User Name — Sets the PPPoE user name for the WAN port.
◆
Password — Sets a PPPoE password for the WAN port.
◆
Verify Password — Prompts you to re-enter your chosen password.
◆
Operation Mode — Enables and configures the keep alive time and configures the
◆
on-demand idle time.
3)
Security Setup
Network Name (SSID) —
SSID (Service Set Identification) must be assigned to all
8