IP Address — The IP address of N2 on the local area network.
◆
( Default: 192.168.2.1 )
Subnet Mask — The subnet mask of N2 on the local area network
◆
DHCP Server — The DHCP Server is to assign private IP address to the N2 in your
◆
local area network(LAN). The default LAN IP address is 192.168.2.1, changing IP
address will also change the DHCP server's IP subnet.
A
R
DVANCED
OUTING
In this section, allow to configure routing feature in the N2.
Destination — The IP address of packets that can be routed.
◆
Type — Defines the type of destination. ( Host: Signal IP address / Net: Portion
◆
of Network )
Netmask — Displays the subnetwork associated with the destination.
◆
Gateway — Defines the packets destination next hop
◆
Interface — Select interface to which a static routing subnet is to be applied
◆
Comment — Help identify the routing
◆
RIP — Enable or disable the RIP(Routing Information Protocol) for the WAN or
◆
LAN interface.
32