SNMP Settings – Managing devices on IP networks. Default setting is Disabled.
SSH Settings – Secure Shell. Enable your N2 unit to access secure shell (SSH)
based network device. Default setting is Disabled.
O
M
PERATION
ODE
The Operation Mode content four modes: AP Bridge, AP Router, Client Router and
Client Bridge.
AP Bridge — The wired Ethernet and wireless are bridged together. Once the
◆
mode is selected, all WAN related functions will be disabled.
AP Router — The WAN port is used to connect with ADSL/Cable modem and the
◆
wireless is used for your private WLAN. The NAT is existed between the 2 RJ45 ports
and all wireless clients share the same public IP address through the WAN port to
ISP. The default IP configuration for WAN port is DHCP client
Client Router — The N2 will behave just the same as the client mode for wireless
◆
function. However, router functions are added between the wireless WAN side and
the Ethernet LAN side. Therefore, the WSIP subscriber can share the WISP
connection without the extra router.
Client Bridge — The N2 will behave just the same as Wireless adapter. With
◆
Client Bridges, the WLAN and the LAN are on the same subnet. Consequently, NAT
is no longer used and services that are running on the original network.
22