Listening To Memorized Stations; Giving A Station Memory A Name - Pioneer XC-L77(DU-L77) Operating Instruction

6 Using the Tuner
Listening to a Memorized Station
In station memory mode the
display shows the station
memory number and the
frequency

Giving a Station Memory a Name

28
When using the tuner button to switch between FM and AM, you've probably noticed a
third option. This is the station memory mode, in which you can listen to the stations
you've previously memorized.
AUX/CD-R SOUND
STANDBY/ ON
1 Press TUNER repeatedly until the display
looks something like the display left.
Remember: the
TUNER
well as the station memories.
Use the $ and › buttons to step
2
through the station memories.
The tuner will jump immediately to the frequency in the station memory.
Unless you've given the station memory a name (see below for how to do
this), the display shows the station memory number and the frequency.
If you've set up more than a couple of station memories, you'll probably want to give
them names that are a little more memorable than "FM 98.70." Normally, of course,
the name will be that of the radio station.
MENU
AUX/CD-R SOUND
STANDBY/ ON
1 Recall the station memory you want to
name.
See Listening to Memorized Stations above for detailed instructions on this.
2 Press MENU and select STATION NAME.
Remember: switch between menu options using the $ and ›
buttons; select the option by pressing
4
& $
DISPLAY SET MD TAPE TIMER/
! —
REC CHARACTER CANCEL
TUNER
button gives you access to FM and AM bands, as
4
SET
& $
DISPLAY SET MD TAPE TIMER/
! —
REC CHARACTER CANCEL
CHARACTER
.
SET
¢
›
VOL
+ ⁄
¢
›
VOL
+ ⁄
TUNER