Setting The Radio Timer - JVC KD-R90BT Instructions Manual

Setting the Radio Timer

You can tune in to a preset station at a specific
time regardless of the current source.
1
(Hold)
2
[Off] Cancels Radio Timer.
Once Activates once.
Daily Activates daily.
3 Select the preset station.
4 Set the activation time.
5 Press MENU to exit.
lights up after the Radio Timer has been set.
Only one timer can be set. Setting a new timer
will override the previous setting.
The Radio Timer will not activate if the unit is
turned off or if <AM> is set to <Hide> after
selecting an AM station for the timer.
( page 26)
<Tuner>
<Radio Timer>
<Off>/<Once>/
<Daily>
<FM>/<AM>
<1> ... <18> for FM/
<1> ... <6> for AM
Naming the stations
You can assign names for up to 30 station
frequencies (FM and AM) using a maximum of 8
characters for each name.
1 Select <FM> or <AM>.
2 Enter "Name Entry" menu.
(Hold)
3 Enter the desired name.
Move
Select
Select the desired character (see below) or a
space, then move to the next (or previous)
character position.
Repeat step 3 until you have finished entering the
name.
4 Press the control dial to confirm.
If you try to assign names to more than 30
station frequencies, "Name Full" appears.
Delete unwanted names before assignment.
Available characters
A – Z (uppercase), a – z (lowercase), 0 – 9
(numbers), and the following symbols:
! " # $ % &
– . / : ; < = > ? @ –
To erase the entire name, press and hold DISP
after step 2, then press the control dial.
Radio
(Hold)
' ( ) + ,
ENGLISH | 7