Audio Adjustments; Other Functions; Using The Equalizer; Adjusting Initial Settings - Pioneer DEH-1300MP Owner's Manual

Section
02 Operating this unit
Automatically enhances compressed audio and re-
stores rich sound.
1 Press a or b to select your favorite setting.
OFF (off)—1—2
1 is effective for low compression rates, and 2 is
effective for high compression rates.
FF/REV (fast forward/reverse)
You can switch the search method between fast for-
ward/reverse and searching every 10 tracks. Selecting
ROUGH enables you to search every 10 tracks.
1 Press d to select ROUGH.
FF/REV – Fast forward and reverse
ROUGH – Searching every 10 tracks
To select FF/REV, press c.
2 Press B (BAND/ESC) to return to the playback dis-
play.
3 Press and hold c or d to search every 10 tracks
on a disc (folder).
If the rest of track number is less than 10, press
and hold c or d recalls the first (last) one.

Audio Adjustments

Audio Adjustments
% Press AUDIO to select the audio func-
tion.
After selecting, perform the following proce-
dures to set the audio function.
FAD (fader/balance adjustment)
1 Press a or b to adjust fader (front/rear speaker
balance).
2 Press c or d to adjust the balance (left/right
speaker balance).
BASS/MID/TREBLE (equalizer adjustment)
! Adjusted equalizer curve settings are stored in
CUSTOM.
1 Press a or b to adjust the level.
Adjustment range: +6 to -6
LOUD (loudness)
Loudness compensates for deficiencies in the low-
and high-frequency ranges at low volume.
1 Press a or b to turn loudness on or off.
2 Press c or d to select the desired setting.
LOW (low)—HI (high)
! You can also turn loudness on or off by pressing
and holding E (EQ/LOUD).
8
En
SLA (source level adjustment)
SLA (Source Level Adjustment) lets you adjust the vo-
lume level of each source to prevent radical changes
in volume when switching between sources.
! When selecting FM as the source, you cannot
switch to SLA.
! Settings are based on the FM volume level, which
remains unchanged.
! The AM volume level can also be adjusted with
this function.
1 Press a or b to adjust the source volume.
Adjustment range: SLA +4 to SLA –4

Using the equalizer

% Press E (EQ/LOUD) to select the equali-
zer.
DYNAMIC—VOCAL—NATURAL—CUSTOM
—FLAT—POWERFUL
! CUSTOM allows you to create a customized
setting.

Other Functions

Adjusting initial settings

1 Press SRC/OFF and hold until the unit
turns off.
2 Press SRC/OFF and hold until the clock
appears in the display.
3 Press FUNC to select the initial setting.
After selecting, perform the following proce-
dures to set the initial setting.
Setting the clock
1 Press c or d to select the segment of the clock
display you wish to set.
Hour—Minute
2 Press a or b to put a clock right.
AUX (auxiliary input)
Activate this setting when using an auxiliary device
connected to this unit.
1 Press a or b to turn auxiliary setting on or off.