Power Cord; Power Amp (Sold Separately) - Pioneer DEH-1300MP Owner's Manual

Installation
This unit
1 2 3
1 Antenna input
2 Fuse (10 A)
3 Power cord input
4 Rear output

Power cord

1
L
2

4
6
F 7


5
b
R

e
f
g
h
1 To power cord input
2 Left
3 Right
4 Front speaker
5 Rear speaker
6 White
7 White/black
8 Gray
9 Gray/black
a Green
b Green/black
c Violet
d Violet/black
e Black (chassis ground)
Connect to a clean, paint-free metal location.
f Yellow
Connect to the constant 12 V supply terminal.
g Red
h Blue/white
4
Note
With a 2 speaker system, do not connect anything
to the speaker leads that are not connected to
speakers.

Power amp (sold separately)

Perform these connections when using the
optional amplifier.
R
3

8
9


c
d
1 System remote control

2 Power amp (sold separately)
3 Connect with RCA cables (sold separately)
4 To Rear output
5 Rear speaker
Installation
! Check all connections and systems before
! Do not use unauthorized parts as this may
! Consult your dealer if installation requires dril-
! Do not install this unit where:
Connect to terminal controlled by ignition
switch (12 V DC).
Connect to system control terminal of the
power amp or auto-antenna relay control
terminal (max. 300 mA 12 V DC).
1
2
 
5 5
 
Connect to Blue/white cable.
Important
final installation.
cause malfunctions.
ling of holes or other modifications to the vehi-
cle.
— it may interfere with operation of the vehi-
cle.
— it may cause injury to a passenger as a re-
sult of a sudden stop.
Section
03
3 4
11
En