Troubleshooting - JVC KD-G126 Instructions Manual

Ejecting a disc
• If the ejected disc is not removed within
15 seconds, the disc is automatically inserted
again into the loading slot to protect it from
dust. (Disc will not play this time.)

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service
center.
Symptoms
• Sound cannot be heard from the
speakers.
• This unit does not work at all.
• SSM automatic presetting does not
work.
• Static noise while listening to the
radio.
• Disc automatically ejects.
• CD-R/CD-RW cannot be played
back.
• Tracks on the CD-R/CD-RW cannot
be skipped.
• Disc can be neither played back nor
ejected.
• Disc sound is sometimes interrupted.
• "NO DISC" appears on the display.
12
General settings—PSM
• If you change the "AMP GAIN" setting from
"HIGH PWR" to "LOW PWR" while the
volume level is set higher than "VOL 30," the
unit automatically changes the volume level to
"VOL 30."
Remedies/Causes
• Adjust the volume to the optimum level.
• Check the cords and connections.
Reset the unit (see page 2).
Store stations manually.
Connect the antenna firmly.
Insert the disc correctly.
• Insert a finalized CD-R/CD-RW.
• Finalize the CD-R/CD-RW with the component
which you used for recording.
• Unlock the disc (see page 7).
• Eject the disc forcibly (see page 2).
• Stop playback while driving on rough roads.
• Change the disc.
• Check the cords and connections.
Insert a playable disc into the loading slot.