Suunto ELEMENTUM VENTUS User Manual page 20

3. The tilt calibration starts automatically after a successful level calibration.
4. Keep the device tilted 90º until you hear the confirmation sound. The device
informs 'OK' when the calibration is successful.
NOTE: The device informs 'FAIL' if the calibration does not succeed. If the
calibration fails, re-calibrate the compass.
TIP: Buckle the device strap, place the support cushion inside the strap and
put it in the package so that the device is level. Perform the calibration on a table,
which does not contain metal.
14