Table of Contents
Advertisement
Display
Problem
Camera in shooting mode:
Insuffi cient memory to re-
cord pictures at current
OUT OF MEMORY
settings.
Camera connected to com-
(or
)
puter: Not enough memory
to record information need
for transfer.
• Camera has run out of
fi le numbers.
• Not enough memory to
copy pictures.
• Camera can not copy
picture using small pic-
ture or crop options.
• Invalid image chosen for
welcome screen.
File created by computer or
FILE CONTAINS
NO IMAGE DATA
different make of camera.
Time out error while re-
CANNOT RECORD
MOVIE
cording movie.
Travel destination is in
NEW CITY IS IN THE
same time zone as home
CURRENT TIME ZONE
location.
WARNING !
Mode dial is positioned be-
THE MODE DIAL IS NOT
tween two modes.
IN THE PROPER POSITION
Error occurred when pic-
TRANSFER ERROR
tures were transferred to
computer.
TRANSFER CANCELLED Transfer cancelled.
No pictures on memory
CARD CONTAINS
card or in internal mem-
NO IMAGES
ory.
Pictures can not be viewed
ALL IMAGES ARE
HIDDEN
on COOLPIX 4800.
Attempt to delete protect-
THIS IMAGE CANNOT
BE DELETED
ed picture.
106
$00_Q02145_En 106-107
Solution
• Choose new image mode.
65
• Insert new memory card or
10, 80
delete pictures.
• Insert new memory card or
10, 80
delete pictures.
• Format destination or delete
10, 80,
pictures. If copying pictures
98
to memory card, insert new
memory card.
• Copies can not be created
50, 85
from movies or from other
copies.
• Choose
image
640 × 480
92
pixels or larger.
View fi le on computer or cor-
—
rect make of camera.
Choose memory card with
101
better performance.
No need to specify new time
zone if travel destination is
94
in same time zone as home
location.
Adjust mode dial to select de-
7
sired mode.
Restart transfer after check-
ing that camera is connected
15, 55
and that batteries are fully
charged.
Press
button to return to
21
shooting mode.
Remove protection before de-
82
leting picture.
Display
Problem
• PictureProject is not run-
ning.
• USB cable disconnected
or memory card removed
while pictures are being
transferred to computer.
COMMUNICATIONS
ERROR
• USB option set incorrectly.
No pictures selected for
transfer when center of
NO IMAGES ARE
MARKED FOR
multi selector pressed to
TRANSFER
transfer pictures to com-
puter.
Error has occurred in cam-
SYSTEM ERROR
era's internal circuitry.
Error has occurred during
LENS ERROR
lens operation.
Solution
• Start PictureProject before
—
pressing center of multi se-
lector.
• If error appears in computer
53–56
monitor, click OK to exit
PictureProject.
Turn cam-
era off, reconnect cable or
replace memory card, then
turn camera on and transfer
pictures.
• Turn camera off and discon-
53
nect cable, then choose new
USB setting in camera setup
menu and reconnect cam-
era.
If error persists, use
Transfer button in Picture
Project to transfer pictures.
Disconnect camera and select
at least one picture for trans-
53, 83
fer, then begin transfer again.
Turn camera off, unplug op-
tional AC adapter (if using),
remove and reinsert batteries,
8–9
and turn camera on. If error
persists, contact retailer or
Nikon representative.
Turn camera off and then on
again. If error persists, con-
—
tact retailer or Nikon repre-
sentative.
107
2004.6.1, 4:18:12 PM
Advertisement
Table of Contents
