Table of Contents
Advertisement
Viewing Pictures on TV
The EG-CP14 audio / video (A / V) cable included with the camera can be used
to connect the camera to a television or video-cassette recorder (VCR).
Choosing a Video Mode
The Video mode item in the setup menu offers a choice of NTSC and PAL
(
99). Be sure that the mode selected matches the standard used in the
video device.
1
Turn the camera off
Turn the camera off before connecting or disconnecting the A / V cable.
2
Connect the A / V cable
Open the interface connector cover as shown at
right and insert the black plug into the camera's
interface connector. Insert the yellow plug into the
video-in jack on the television or VCR. Connect the
white plug to the audio-in jack.
3
Tune the television to the video channel
If in doubt, consult the documentation for your television or VCR.
4
Turn the camera on
Press the
button for about a second to turn the camera on. The camera
monitor will remain off and the television will show the image normally
shown in the monitor.
PAL
If PAL is selected for Video mode and the camera connected to a video device, video
output will be suspended and the camera monitor or electronic viewfi nder will turn on
when the camera is in movie mode.
52
$00_Q02145_En 52-53
Viewing Pictures on a Computer
Using the UC-E6 USB cable and PictureProject software provided with your
camera, you can view your photographs and movies on a computer. Before
you can transfer (copy) pictures to your computer, you will need to install
PictureProject. For more information on installing PictureProject and transfer-
ring pictures to your computer, see the PictureProject Reference Manual (on
CD) and the Quick Start Guide.
Before Connecting the Camera
Pictures can be copied from the camera to the computer by:
• Pressing the center of the multi selector (
• Clicking the Transfer button in PictureProject
Which method you will use depends on your comput-
er's operating system and the USB option selected in
the camera setup menu. After consulting the follow-
ing table, select the appropriate option using the USB
item in the camera setup menu. The default option is
Mass Storage.
Camera multi selector
Operating system
(
Windows XP Home Edition
Windows XP Professional
Windows 2000 Professional
Windows Millennium Edition (Me)
Windows 98 Second Edition (SE)
Mac OS X 10.1.5 or later
Choose PTP.
"Mass Storage"
If Mass Storage is selected for USB, the center of the multi selector (
not be used to transfer pictures from internal memory or from "locked" (write-pro-
tected) memory cards (
11). Use the PictureProject Transfer button.
button)
Center of multi selector
(
button)
Pictures transferred using:
PictureProject
button)
Transfer button
Choose Mass Storage or PTP.
Choose Mass Storage.
Choose Mass
Storage or PTP.
button) can
53
2004.6.1, 4:16:07 PM
Advertisement
Table of Contents
