Nikon CoolPix 4800 User Manual page 34

Choosing a USB Option
SET-UP SET-UP 1/4 1/4
1
Welcome screen
Date
Date imprint
Select SET UP mode.
USB USB
3
PTP
Mass storage
Display USB menu.
USB USB
5
PTP
Mass storage
54
$00_Q02145_En 54-55
SET-UP SET-UP 3/4 3/4
2
Format memory
Language
USB
Highlight USB.
USB USB
4
PTP
Mass storage
Highlight PTP or Mass Storage.
Make selection.
Connecting the USB Cable
Turn the computer on and wait for it to start up. After confi rming that the
camera is off, connect the UC-E6 USB cable as shown below. Connect the
camera directly to the computer; do not connect the cable via a USB hub or
keyboard.
UC-E6 USB cable
The lens will extend when the camera is turned on.
Windows 2000 Professional, Windows Millennium Edition (Me),
Windows 98 Second Edition (SE)
Do select PTP when connecting the camera to a computer running one of the above
NOT
operating systems. If you have connected the camera to a computer running one of the
above operating systems with PTP selected in the USB menu, disconnect the camera as
described below. Be sure to select Mass Storage before reconnecting the camera.
Windows 2000 Professional
A dialog will be displayed welcoming you to the Found New Hardware Wizard. Click
Cancel to close the dialog, and then disconnect the camera.
Windows Millennium Edition (Me)
After displaying a message stating that the hardware information database is being
updated, the computer will start the Add New Hardware Wizard. Click Cancel to exit
the wizard, and then disconnect the camera.
Windows 98 Second Edition (SE)
The Add New Hardware Wizard will be displayed. Click Cancel to exit the wizard, and
then disconnect the camera.
55
2004.6.1, 4:16:08 PM