Shutter-Priority Ae - Panasonic LUMIX DMC-L1K Operating Instructions Manual

Shutter-priority AE

[ ]
When you want to take a sharp picture of a
fast moving subject, set with a faster
shutter speed. When you want to create a
trail effect, set to a slower shutter speed.
1 Rotate the aperture ring to [A]
while pressing the aperture ring
button A.
A
2 Rotate the shutter speed dial to
set the shutter speed.
B
ON
OFF
B: [2-60s/B] to [1000-4000]
S S 1000 1000
STANDARD STANDARD
WB WB
- 2 - 1
AUTO AUTO
ISO ISO
100 100
SINGLE SINGLE
• The mode becomes Shutter-priority AE
mode [ ].
• If the shutter speed dial is set to [2-60s/
B] or [1000-4000], press 3/4 or rotate
the command dial C to set the shutter
speed.
A
3 Take a picture.
• When the flash is activated, the shutter
speed becomes slower than 1/160th of a
second regardless of the shutter speed
setting. (P61)
• If you press the shutter button fully when
the shutter speed is slow, the shutter
speed on the screen counts down.
• We recommend using a tripod when the
shutter speed is slow.
• If you press the shutter button halfway
when the exposure is not adequate, the
aperture value and the shutter speed turn
red. The aperture value and the shutter
0 +1 +1 +2 +2
speed blink on the Viewfinder. (They do
CUSTOM CUSTOM
NORMAL NORMAL
not blink when the flash is activated.)
19 19
• When most of the subject is bright, such
as during fine weather or snow, the
recorded pictures may become dark. In
these cases, compensate the exposure
towards positive. (P40)
• The ISO sensitivity cannot be set to
[AUTO]. (The ISO sensitivity is
automatically set to [ISO100] when you
switch from [AUTO] to Shutter-priority AE.)
S 1000 1000
STANDARD STANDARD
WB WB
-2 -1 0
AUTO AUTO
ISO ISO
100 100
SINGLE SINGLE
• You can set from 1/2 of a second to
60 seconds in steps of [1/3 EV] if the
shutter speed dial is set to [2-60s/B].
• You can set from 1/1000th of a second
to 1/4000th of a second in steps of
[1/3 EV] if the shutter speed dial is set
to [1000-4000].
• If you set [DIREC. EX. COMP.] (P86) to
[ON], you cannot use the command
dial.
Basic
+1 +1 +2 +2
CUSTOM CUSTOM
NORMAL NORMAL
19 19
C
37
VQT0W95