Panasonic LUMIX DMC-L1K Operating Instructions Manual page 110

Others
∫ Finishing setting the home area
• If you are setting the home area for the
first time, the screen returns to the screen
shown in step 1 of "Setting the home
area [HOME]" after you press [MENU/
SET] to set your home area. Press 2 to
return to the screen shown in step
then press [MENU/SET] to close the
menu.
• If you are setting the home area for the
second time etc., the screen returns to the
3
screen shown in step
[MENU/SET] to set your home area.
Press [MENU/SET] again to close the
menu.
∫ Setting the travel destination area
1 2
(Perform steps ,
1 Press 3/4 to select [DESTINATION]
and then press [MENU/SET] to set.
WORLD TIME
DESTINATION
HOME
A
--:-- --.--.----
EXIT SELECT
A: Depending on the setting, the time at
the travel destination area or the
home area is displayed.
• If you are setting the travel destination
area for the first time, the date and time
are displayed as shown in the screen.
2 Press 2/1 to select the area the travel
destination is in and then press [MENU/
SET] to set.
10:00
Seoul
Tokyo
- 0:30
SELECT
110
VQT0W95
3
and
after you press
3
and .)
MENU
MENU SET
SET
9:30
MENU
CANCEL
SET
MENU
SET
• The current time at the selected travel
destination area is displayed on the top
right of the screen and the time
difference from the home area is
displayed at the bottom left of the
screen.
• If daylight saving time [
the travel destination, press 3. (The
time advances by one hour.) Press 3
again to return to the original time.
• The names of major cities in the
selected area are displayed. Also, the
time difference between the selected
area and the home area is displayed on
the bottom left of the screen. (Refer to
P111 for information about the names
of the major cities that are displayed.)
3 Press [MENU/SET] to close the menu.
SET UP
CLOCK SET
WORLD TIME
MONITOR
AUTO REVIEW
POWER SAVE
SELECT
• The icon changes from [
after setting the travel destination.
• Return the setting to [HOME] when the
vacation is finished by performing
1 2 3
steps , , and then steps 1 and 2 of
"Setting the home area [HOME]".
• If you cannot find the travel destination in
the areas displayed on the screen, set by
the time difference from the home area.
] is used at
1 /
3
MENU
0
SET
5 MIN.
EXIT MENU
] to [ ]