Inserting/Removing
the Card (Optional)
• Check that the camera is turned off.
• Close the flash.
• Prepare a card.
1 Slide the card door to open it.
2 Insert:
Insert the card fully until it clicks
and it is locked.
Remove:
Push the card until it clicks, then
pull the card out upright.
PU SH TO
LOC K / EJE
• Check the direction of the card.
• Do not touch the connection terminals
on the back side of the card.
• The card may be damaged if it is not
fully inserted.
3 1 Close the card door.
• Always turn the camera off before
• The card and the data may be damaged
• We recommend using a Panasonic SD
CT
2 Slide the card door to the end
and then close it firmly.
2
2
1
1 1
• If the card door cannot be completely
closed, remove the card and insert it
again.
opening the card door.
if it is inserted or removed while the
camera is on.
Memory Card or SDHC Memory Card.
Preparation
21
VQT0W95