Single Picture - Panasonic LUMIX DMC-L1K Operating Instructions Manual

Connecting to other equipment
1 Turn on the camera and the
printer.
2 Connect the camera to a printer
via the USB connection cable
(supplied).
• Align the [1] mark on the USB
connection cable and the [
on the terminal of the adaptor when
connecting.
• Hold the USB connection cable at C
and insert straight in or take straight
out.
3 Press 4 to select
[PictBridge (PTP)] and then press
[MENU/SET].
USB MODE
PLEASE SELECT
THE USB MODE
PC
PictBridge(PTP)
SELECT
• If you set [USB MODE] in the [SETUP]
menu to [PictBridge (PTP)] in advance,
it is not necessary to set this every time
you connect to a Printer. (P29)
• Do not use any other USB connection
cables except the supplied one.
102
VQT0W95

∫ Single picture

1 Press 3 to select
] mark
2 Press 2/1 to select the picture
MENU
SET
3 Press 3 to select [PRINT START]
MENU
SET
4 Disconnect the USB connection
[SINGLE PICTURE] and then
press [MENU/SET].
PictBridge
SINGLE PICTURE
DPOF PICTURE
SELECT
and then press 4.
PictBridge
100
PLEASE SELECT
THE PICTURE TO PRINT
SELECT
PRINT
• The message disappears in about
2 seconds.
and then press [MENU/SET].
SINGLE PICTURE
PRINT START
PRINT WITH DATE
NUM. OF PRINTS
PAPER SIZE
PAGE LAYOUT
CANCEL SELECT
• Press [MENU/SET] to cancel printing.
cable after printing.
MENU
SET
MENU
SET
0001
-
1/19
MENU
EXIT
1
MENU
SET
MENU
SET