IMPORTANT SAFETY INSTRUCTIONS
Placement
The unit should be placed on a flat surface,away from direct
sunshine, high temperature, humidity and frequent vibration.
Otherwise, the case and other internal parts will be damaged
and the service life of the unit will be shortened.
In order to avoid distor tion or abnormal sound effects, there
should be at least a distance of 15cm between the unit and
the wall.Do not place heavy objects on the top of the unit.
Voltage
Overvoltage must be avoided; overvoltage will lead to overload
of the unit and fire.
Do not use a DC power supply. Check if the power supply
meets the requirement when the unit is set up in ships or other
locations where DC power supply is used.
Protection of power supply cord
The AC power supply cord should be properly connected, ensuring
that there is no damage in the cord. Poor connection or damage in
cord may lead to fire or electrical shock. It is prohibited to pull or
bend the cord or place heavy objects upon the cord.
When unplugging the AC power supply cord, just grasp the plug
firmly. electric shock may occur if you unplug the cord by pulling
the cord.
Do not plug in or unplug the plug with wet hand, for fear of
electric shock.
Foreign matter
Do not drop metal objects into the unit for fear of leakage current
orfault.
Do not drop liquid into the unit for fear of leakage current or fault.
In case any liquid drops into the unit, immediately unplug the
AC cord, and contact your dealer.
Do not spray insecticide onto or into the unit. The insecticide spra-
yons contains inflammable gas; if it enters the inside of the unit,
fire may be caused.
Service
Do not try to repair the unit by yourself. If there is a fault e.g.
interrupted sound, indicator blankoff, smoke emission or other faults
unlisted in the operating instructions, unplug the AC power supply
cord, and contact your dealer or the authorized service center.
Electric shock or damage to the unit may occur if the unit is repaired,
dismantled,or reassembled by unqualified personnel.
Before cleaning the unit, please unplug the AC power supply cord.
When the unit is not to be used for a long period, please unplug the
AC power supply cord so as to prolong the service life of the unit.
Table of contents
Getting started
Accessories ............................................................................ 2
Disc information...................................................................... 4
Step 1: Layout ................................................................................. 5
Step6: Quick setup..............................................................................10
Basic operations
Basic play................................................................. 12
Navigation menus...................................................................16
Radio operations
Radio ..................................................................................... 21
Manual tuning......................................................................... 21
Preset tuning........................................................................... 21
Sound field/Sound quality
Sound field............................................................................ 22
CENTER FOCUS............................................................. 22
Sound quality....................................................................... 24
Other functions
Use headphones................................................................ 25
Use Karaoke...................................................................... 25
Change settings..................................................................... 26
equipment............................................................................... 28
Reference
Glossary..................................................................................29
Maintenance.............................................................................31
Specifications...........................................................Back cover