STARBUCKS BARISTA AROMA SOLO User Manual page 13

Step
4 Plug in coffee maker:
• Locate cord storage area (10) on back of machine
• Unwind and straighten cord thoroughly to remove kinks
• Wind excess cord back into cord storage area.
• Plug into outlet.
Caution : The cord has a polarized plug (one blade is wider than the
other). If plug does not fit fully in outlet, reverse plug. If plug still does
not fit, contact a qualified electrician to check outlet.
Result :
• The blue backlite, On/Off light and Auto-On Light illuminates for
two seconds,
• A tone sounds.
5 Press the On/Off button (11) and let approximately half of the solution
run through the machine.
Results :
• The blue backlite, On/Off light and Auto-On Light illuminates for
two seconds,
• A tone sounds.
6 Press the On/Off button (11) again and allow the remaining solution to
sit in the water reservoir for 15 to 30 minutes.
7 Press the On/Off button (11) again and allow the remaining solution to
run through the machine.
8 Discard the solution and allow the machine to cool for at least 15
minutes.
9 Hand wash and rinse the water reservoir (2) and thermal carafe (6) with
warm water.
Starbucks Barista Aroma Solo
1-10
Action
Thermal Coffee Maker
TM