Spreader Assembly; Spinner Assembly - SPYKER 297 Operation Manual Service Manual Parts List

Spreader Assembly

4.
Attach two bar (16) to
frame (43) loosely with
2 bolts (44) and 2 nuts
(32).
5.
Attach two bar braces
(19) loosely to tow bar
(16) using 1 nuts (32).
6.
Attach tow bar braces
(19) loosely to frame
(43) with 2 bolts (44)
and 2 nuts (32).
7.
Attach hitch plates (20)
to tow bar (16) using 2
bolts (44) and 2 nuts
(32). Now tighten all
bolts securely.
cont.
4

Spinner Assembly

1.
Insert upper spinner
shaft into the bottom of
hopper so that the end
with the hole for the
agitator wire goes up
into the hopper.
2.
Slide spinner onto
upper spinner shaft.
3.
Slide coupling onto
upper spinner shaft.
4.
Connect upper spinner
shaft and lower spinner
shaft by sliding coupling
down to secure
5