Advertisement
120 SERIES
20 SERIES
MODEL 179
MODEL 88
MODEL 298
Mulch Spreader
MODEL 299
Mulch Spreader
P.O. Box 7
1-800-972-6130
© 2004 Spyker Spreaders – Urbana, IN U.S.A.
FEATURES &
BENEFITS
"ACCUWAY'' Spread Pattern Equalizer
ENSURES spreading dead center of the
spreader.
(Indicated with "22" in model number)
Gears are unconditionally guaranteed
ENSURES trouble free operation.
Dial-A-Matic spread rate control
ENSURES spreading at exact spread
rates.
Optional BORDER PATROL spread pattern
cut-off prevents spreading on drive-ways,
flower beds, etc.
Extension hoppers available for all round
hopper spreaders. Adds 20 lbs. to
capacity.
Shipped Set-Up. Saves time and labor
ENSURES proper assembly. (except #64)
Stainless steel frames ensure longer
spreader life, easier maintenance and
present a quality image.
High grade plastic non-corroding wheels
with nylon bearings, no lubrication
required, ENSURES trouble free
maintenance.
• Urbana, IN
46990
USA
•
Fax 260-774-3416
For Models:
76-22 96-22
78-22 98-22
It's the spread that counts
It's the spread that counts
P.O. Box 7
140 Mill Street
Urbana, IN
46990
05-99-0078
spread with confidence
spread with confidence
Spreading Chart
Operation Guide
Service Manual
1-800-972-6130
Fax: 260-774-3416
USA
Parts List
Model:
98-22
pictured
Advertisement
Table of Contents
Related Manuals for SPYKER 76-22
Summary of Contents for SPYKER 76-22
- Page 1 MODEL 299 Mulch Spreader required, ENSURES trouble free maintenance. P.O. Box 7 140 Mill Street 1-800-972-6130 P.O. Box 7 • Urbana, IN 46990 Urbana, IN Fax: 260-774-3416 1-800-972-6130 • Fax 260-774-3416 46990 © 2004 Spyker Spreaders – Urbana, IN U.S.A. 05-99-0078...
-
Page 2: Assembly Instructions
Hammer Pliers Parts you will use: Parts for Models: 76-22 96-22 78-22 98-22 • (3) 1/4 - 20 x 1 1/2" 55 bolt • (8) 1/4 - 20 55 hex nut • (3) 1/4 - 20 x 1 3/4" 55 bolt For stainless •... - Page 3 Tow Bar Assembly Tow Bar Assembly Insert Clevis Pin Attach braces (8) (43) into Hitch to frame with bolts Plates and fasten (37) and nuts with Cotter Pin (42). (34). Attach braces to towbar , and towbar to frame using 2 bolts (35) and nuts (34).
- Page 4 Walk Behind Frame Assembly Walk Behind Frame Assembly Remove nuts and bolts that attach Attach T-Handle front of hopper to assembly to frame frame as indicated with 1 bolt (31) and and then insert nut (34). Bump Bar (3) into frame assembly.
- Page 5 Walk Behind Frame Assembly Rate Dial Adjustment New Linkage Adjustment Procedure 1. Set regulator dial to 1. 2. Set lever completely to off position. Attach On/Off 3. Attach cable clamp (59) to Control Lever (13) ground prop with 1 ” bolt to T-Handle and nut and finger tighten.
- Page 6 View Exploded View Walk Behind Hopper & Frame Assembly...
- Page 7 Exploded View Pull Behind Hopper & Frame Assembly Note: Nylon washers [55] go on plastic hoppers only...
-
Page 8: Exploded View
Exploded View Parts List Item # Part # Quantity Description Price Stainless Hopper 05-94-0054-0 Hopper/Black 05-91-1100 Hopper/Stainless 05-81-1030 Hand Hold/Bump Bar/Painted 05-97-3030 Hand Hold/Bump Bar/Stainless 05-81-1020 Frame/Painted 05-97-3020 Frame/Stainless 05-94-1120 Ground Prop./Painted 05-98-3020 Ground Prop./Stainless 05-94-1010 T-Handle/Painted 05-98-3010 T-Handle/Stainless 05-94-0022 Handle Grip 05-81-1040 Brace for Ground Prop./Tow Bar/Painted... -
Page 9: Read Before Using
Read Before Using Read Before Using SPEED - ACCURACY - FREEDOM FROM STRIPES AND STREAKS Rotary Agitator are yours - when you use this Spreader. Use the rotary agitator only if needed. Free-flowing, lump-free materi- The spread width ranges from 4 ft. to 12 ft. wide, depending on the als will not require the agitator. - Page 10 Read Before Using Read Before Using NOTE: With the rotary agitator installed, the rate gate closed (not spreading) and with Accuway - What It Does material in the hopper, the spreader will push harder than normal. (This is because the agitator is stirring the material and it has no place to go.) Accuway Spread Pattern Equalizer Balances the spread pattern - Bulls Eye - Dead to the Center of the Spreader.
- Page 11 Grass Seed Spreading Chart Read Before Using Dial settings are approximate only. Spreading at one half rate in cross directions is usually recommended. The Accuway has two ramps. A front side and a back side ramp. The front side ramp is used to shift the spread pattern to the right.
-
Page 12: Year Limited Warranty
P.O. Box 7 • Urbana, IN 46990 successful it's used on all Spyker 70 & 90 Series spreaders. Is so simple. A complicated problem is solved with a fundamental solution. (Newton's law of motion: To every action there is always an opposed and equal reaction.)