Table of Contents
Advertisement
Read Before Using
Accuway - What It Does
Accuway Spread Pattern Equalizer Balances the spread
pattern - Bulls Eye - Dead to the Center of the Spreader. All
products. All spreading conditions. Skewing is eliminated.
Does not change the spread width.
CAUTION: Never, never, never use the Accuway to split the product
flow from the hopper to the spreading spinner.
VARIABLES in product, weather, spreading equipment, spreader
operator, etc., and combinations of variable elements produce
VARIABLES in the spread pattern.
• VARIABLES include product size, weight, shape, surface finish,
hygroscopic or non hygroscopic composition, condition of product
(exposure to humidity, temperature, etc.)
• VARIABLES include spreading rate (light, medium, heavy).
• VARIABLES include size, shape, design of spreading spinner.
• VARIABLES include product dispensing on spreading spinner.
• VARIABLES include condition of the spreader end the spreading
spinner (product build up on the casting vanes, etc.)
• VARIABLES include operator habits, fast or slow walking, tilting
spreader forward or backward or operating spreader in a level
attitude.
Accuway - How It Works
A turn of the spread pattern shifter dial factors the variables.
Shifts the product placement on the spreading spinner.
This in turn balances the spread pattern heavier to right or heavier to
left as required.
Adjustment is very sensitive. (Note the very fine threads on the
Equalizer adjustment stem.)
Viewed from the operators position
To spread heavier left - move the ramp out.
To spread heavier right - move the ramp in.
11
Read Before Using
The Accuway has two ramps. A front side and a back side ramp.
Viewed from operators position.
The front side ramp
is used to shift the spread pattern to the right.
2
The back side ramp
is used to shift the spread pattern to the left.
1
NEVER, NEVER, NEVER USE ACCUWAY FRONT AND REAR RAMPS TO
SPLIT THE PRODUCT FLOW. Use only the front side or the back side.
With proper adjustment you should be able to achieve a balanced
spread pattern.
First - set the spread rate dial
Now you are ready to balance the spread pattern.
A
Note the relationship of the rate gate opening
to the front side of the ramp.
B
Note the relationship of the rate gate opening
to the back side of the ramp.
.
3
2
1
3
12
Advertisement
Table of Contents
