Sony Ericsson P910C User Manual page 155

This is the Internet version of the user's guide. © Print only for private use.
You can choose to use any sound recording or audio file. You can
select ring signals that are stored on your local storage or on a
Memory Stick. If the selected file is later deleted or moved, the
Default Melody will be played instead.
To listen to the selected ringtone or alert
1. Tap the icon to listen to the signal.
2. Tap again to stop playback.
To change the default ring tone or alert
1. Tap the drop-down menu.
2. Select for the P910c default or
Default Melody
select a new one.
3. If required, change folder.
4. Select the required sound
5. Tap and to preview the sound.
6. Tap to set this sound.
Select
Warning! The volume may be uncomfortably loud at the
higher volume levels if the phone is close to your ear. Exposure
to excessive volume may damage hearing.
Note To set vibrating alert, silent mode, speakerphone or mute
the microphone, tap the volume icon on the status bar.
Calls tab
These settings set incoming call alerts. For more information see
'Ring signals' on page 150.
You may personalize the ring melodies further for individual
contacts, see 'To change the details of a contact' on page 110.
•
Ring (voice)
•
Ring (voice) line 2
calls.
•
Ring (data)
to
Find sound
•
Ring volume
handsfree and car use.
•
Increasing ring
signals. This disables the other volume settings.
Messages tab
These settings set messaging alerts.
•
Display notification message
notification of a received message.
•
SMS
•
Email
•
MMS
– Select a ring signal for incoming voice calls.
– Select a ring signal for incoming voice
– Select a ring signal for incoming data calls.
– Set the preferred sound level for handheld,
– Select the checkbox to use increasing ring
– Select the check box to receive
– Select an alert for received SMS messages.
– Select an alert for received Email messages.
– Select an alert for received MMS messages.
Control panel 155