EN Manual FINAL (Ambient) NEW
h
NIKE ELECTROLITE
You can illuminate the entire
watch display by pressing the
Electrolite button.
Activate the Electrolite display feature
Press BUTTON C to illuminate both the analog and digital
displays for 3 seconds.
Note: Irregular movements of the second sweep
hand indicate the battery needs to be replaced.
These irregular movements do not effect accuracy.
4/26/99
5:04 PM
Page 26
C
CROWN
B
A
26
SPECIFICATIONS
MODE LIMITS
TIMER
COUNTER
TEMPERATURE
TEMPERATURE ACCURACY
Accuracy is ±1C° (1.8F°) between –5C° (23F°) and +25C° (77F°), ±2 C° (3.6F°) outside this range.
Remember that temperature is affected by body heat. To minimize this effect, wear the watch on
the outside of clothing or away from the body. Direct sunlight will also affect temperature display.
TEMPERATURE SAMPLING RATES
TEMP mode
Sampling occurs every 5 seconds during the 1st minute, then every 2 minutes for 1 hour.
Then every 5 minutes for 3 hours. After approximately 4 hours the watch will enter TIME
mode to conserve battery power.
All other modes - When TEMPERATURE ALARM is activated sampling interval is 10 minutes.
When TEMPERATURE ALARM is not activated, sampling interval is 1 hour.
H2O Resistance
50 Meters
MATERIALS
CASING
STRAP
CASEBACK
BATTERY
Battery Life 1.5 years
Note that at extremely low temperature it is normal for the Liquid Crystal Display to slow noticeably .
This is not a sign of a low battery.
27
59'59"
999
-20C to +55C
Polycarbonate
FRESH:Stretchable
acrylic/Polyester
FROZEN: Polyurethane
Stainless Steel
Battery Type CR-2016