Nike TRIAX 26 Manual page 7

EN Manual FINAL (RunII) NEW
3 Press the STOP/NEXT button to decrease the flashing value.
4 Press the MODE button to cycle to the next value.
5 Repeat steps 2-4 until you have set all values: seconds,
minutes, hours, and segment numbers.
6 Press the ADJUST/RESET button to save timer settings.
4/26/99 5:00 PM Page 12
12
Start the countdown
1 Set any or all 5 segments.
2 Press the STOP/NEXT button to advance to the segment
you want to start with.
3 Press the START/LAP button.
Countdown begins. When the countdown reaches zero, the
timer beeps, and the countdown begins for the next segment.
The number completed timer cycles appears above the
countdown display.
NOTE: When the countdown is complete for all 5 segments,
the cycle repeats. For example, when segment 1 is completed,
segment 2 will begin. If segments 3,4 and 5 are set to zero,
segment 1 will begin at the completion of segment 2.
Stop the timer during countdown
Press the STOP/NEXT button.
Reset the timer
When timer is stopped, press and hold the ADJUST/RESET
button for about 2 seconds.
Display returns to the original starting point.
13