The Remote Control; Placement; Connections - Panasonic SC-EN9 Operating Instructions Manual

The remote control

g Batteries
(R6, AA, UM-3)
• Insert so the poles (+ and –) match those in the remote control.
• Do not use rechargeable type batteries.

Placement

Place this unit in an area with more than 300
mm of vertical space.
The CD lid may become damaged if it cannot
open completely.

Connections

1 AM loop antenna
Stand the antenna up on its base.
Placement of speakers
You can remove the speaker cover netting.
Left and right speakers are exactly the same.
Note
Note
• Keep your speakers at least 10 mm away
from the system for proper ventilation.
• These speakers do not have magnetic
shielding. Do not
televisions, personal computers or other
devices easily influenced by magnetism.
• To avoid damage to the speakers, do not
touch the speaker cones if you have taken
the nets off.
2 Speakers
Before connecting, twist and
pull off the speaker cord
ends.
Black Red
Black
Red
Copper (+)
1
2
L
R
Silver (–)
Copper (+)
g Use
• Aim at the sensor, avoiding obstacles, at a maximum range of 7 m
directly in front of the unit.
• Operation can be affected by strong light sources, such as direct
sunlight, and the glass doors on cabinets.
place them near
3 DAB "T" antenna
The cross bar of the T should be
kept firmly stretched.
Find a position with good reception.
There is a function on the unit to check
signal quality (→ page 8).
Silver (–)
For best reception
A DAB outdoor antenna is recommended (→ page 10).
4 AC adaptor
Connect the AC adaptor only
after all other connections
have been made.
DC IN
To household
mains socket
Remote control signal sensor
Caution
• Use the speakers only with the
recommended system. Failure
to do so may lead to damage
to the amplifier and/or the
speakers, and may result in
the risk of fire. Consult a
qualified service person if
damage has occurred or if you
experience a sudden change
in performance.
• Do not attach these speakers
to walls or ceilings.
Be sure to fully
tighten the screw.
Adhesive tape
BE SURE TO READ THE CAUTION
FOR THE AC MAINS LEAD ON
PAGE 2 BEFORE CONNECTION.
Note
Note
If the unit is left unplugged for
longer than two weeks, all settings
will revert to the factory settings.
13V
Do the settings again if this
occurs.
3
RQT7695