Panasonic LUMIX DMC-FX33 Operating Instructions Manual page 46

∫ Cancelling setting
If you press and hold [LCD MODE] again for
1 second the screen shown in step
displayed. Select [OFF] to cancell a setting.
• High angle mode is also cancelled if you turn
the camera off or power save mode is
activated.
• The brightness of the pictures displayed on
the LCD monitor screen are increased in
Auto Power LCD, Power LCD and High angle
modes. Therefore, some subjects may look
different on the LCD monitor. However, this
does not affect the recorded pictures.
• The LCD monitor automatically returns to
normal brightness after 30 seconds when
recording in Power LCD mode. Press any
button to make the LCD monitor bright
again.
• If the screen is difficult to see because of
light from the sun etc. shining on it, use your
hand or another object to block the light.
• Auto Power LCD and High angle mode are
not activated in the following cases.
– When the clipboard is playbacked in
clipboard mode [
– In playback mode [
– In print mode [
– While the menu screen is displayed
– While the review screen is displayed
Advanced (Recording pictures)
2
is
]
]
]
- 46 -