Panasonic LUMIX DMC-FX33 Operating Instructions Manual page 128

• When connecting the camera to a
"Windows 2000" OS PC with the USB
connection cable, do not replace the card
while the camera and the PC are
connected. The information on the card
may be damaged. Use "Safely Remove
Hardware" in the task tray on your PC
when replacing the card.
• Pictures edited or rotated with a PC may be
displayed in black in playback mode, multi
playback and calendar playback.
• Read the operating instructions for the PC.
• If a card is not inserted when the camera is
connected to the PC, you can access the
picture on the built-in memory. If a card is
inserted, you can access the picture data on
it. (If the camera is connected in clipboard
mode, the built-in memory data is displayed
even if a card is inserted.)
• You cannot switch between the built-in
memory and the card while the camera is
connected to the PC. When you want to
switch between the built-in memory and the
card, disconnect the USB connection cable,
insert (or remove) the card and then connect
the USB connection cable to the PC again.
• The message [PLEASE RE-CONNECT THE
PRINTER.] appears if you change the mode
dial to print mode [
connected to a PC. If connecting the printer
again, change the mode to a mode other
than [ ] and then check that no data is
being transferred. [ACCESS] appears on the
LCD monitor of this unit while data is being
transferred.)
Connecting to other equipment
] while this unit is
- 128 -