External Unit; Connecting The Ipod; Compatible Ipod; Changing The Main Unit And Remote Control Mode - Panasonic SC-EN37 Operating Instructions Manual

External unit

g Connecting the iPod
Dock adapter for iPod Dock adapter for iPod
nano 2nd generation 5th generation (video)
(aluminum) (60GB, 80GB)
(2GB, 4GB, 8GB)
11
11 10 9
The mark , or is shown on the back of each dock adapter.
• For other types of iPod, please use the dock adapter sold separately.
Do not connect or
disconnect the dock
while the main unit is on.
When removing,
insert your fingernail
or a flat object and lift
upwards.
Universal Dock for iPod
g Charging the iPod
iPod (not included)
The indicator lights up when the iPod
is inserted, and charging starts.
iPod nano 2nd generation (aluminum)
iPod 5th generation (video)
iPod nano 1st generation
iPod 4th generation (color display)
iPod 4th generation
iPod mini
Note
• AC mains lead and DC in cord must be connected to the CD stereo system.
• "OPTION " will be shown on the main unit display during iPod charging in main
unit standby mode. It will go off when charging is finished.
• For the above models under "fixed 5-hour charging",
"OPTION " continues to be displayed throughout this duration, even when your
iPod is fully charged. You can turn off this display by removing the iPod from the
dock.
• Compatibility depends on the software version of your iPod.
5
Enjoying audio from iPod
Dock adapter for iPod
5th generation (video)
(30GB)
10 9
Connect the dock to the
back of the main unit.
(➡ page 3)
Until iPod is fully charged
5 hours (fixed)
➡ Page 2 for the position of remote control and main unit buttons.
g Playing the iPod
Preparation:
• Reduce the volume of the main unit.
• Confirm the iPod connection. (➡ left)
 Press [OPTION q/h] to play the iPod.
 Adjust the volume of the main unit.
Remote control
To pause track
To skip a track
(During play/pause)
To search the current track press and hold
(During play/pause)
When you select another source, or turn the main unit off, the iPod turns off.

■ Compatible iPod

Name
iPod nano 2nd generation (aluminum)
iPod 5th generation (video)
iPod 5th generation (video)
iPod nano 1st generation
iPod 4th generation (color display)
iPod 4th generation (color display)
iPod 4th generation
iPod 4th generation
iPod mini
• Compatibility depends on the software version of your iPod.
iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
Changing the main unit and
remote control mode
The remote control and main unit are factory-set to "REMOTE 1" mode.
If your remote control affects other equipment during operation, you can switch to
operate in "REMOTE 2" mode.
To switch to "REMOTE 2" mode
 (While pressing and hold [OPTION q/h] on the main unit)
Press and hold [2] until "REMOTE 2" appears on the main unit display.
 Press and hold [ENTER] and [2] for at least 2 seconds.
The main unit and remote control are now set to operate in "REMOTE 2" mode.
To return to "REMOTE 1" mode
Perform steps 1 and 2 above but use [1] instead of [2] for both steps. ("REMOTE 1"
appears on the main unit during step 1.)
The remote control cannot work with the main unit if their modes are different.
"REMOTE 1" or "REMOTE 2" appears on the main unit when you operate the
remote control.*
* If "REMOTE 1" appears (The main unit is in "REMOTE 1" mode.)
Press and hold [ENTER] and [1] on the remote control for at least 2 seconds.
If "REMOTE 2" appears (The main unit is in "REMOTE 2" mode.)
Press and hold [ENTER] and [2] on the remote control for at least 2 seconds.
Main unit
press and hold
Memory size
2GB, 4GB, 8GB
60GB, 80GB
30GB
1GB, 2GB, 4GB
40GB, 60GB
20GB, 30GB
40GB
20GB
4GB, 6GB