Adjust The Flash Output - Panasonic LUMIX DMC-FX180 Operating Instructions Manual

∫ The available flash range to take pictures
•
The available flash range is an approximation.
ISO sensitivity
¢
AUTO 60 cm to 5.9 m
100 60 cm to 1.8 m
200 60 cm to 2.6 m
400 60 cm to 3.7 m
800 80 cm to 5.3 m
1600 1.15 m to 7.5 m
•
In [HIGH SENS.] (P71)
[ISO1600] and [ISO6400] and the available flash range also differs.
Wide: Approx. 1.15 m to approx. 15.1 m
Tele: Approx. 90 cm to approx. 7.5 m
•
In [FLASH BURST]
[ISO100] and [ISO3200] and the available flash range also differs.
Wide: Approx. 60 cm to approx. 4.0 m
Tele: Approx. 30 cm to approx. 2.0 m
¢ When the [ISO LIMIT SET] is set to [AUTO].
Adjust the flash output when the subject is small, or the reflectivity is very high or low.
1
Press 3 [È] several times to display [FLASH], and then
press 2/1 to set the flash output.
•
You can adjust from [
•
Select [0 EV] to return to the original flash output.
2 Press [MENU/SET] to close the menu.
•
You can also close the menu by pressing the shutter button
halfway.
Note
•
When the flash output is adjusted, the flash output value appears on the upper left of the
screen.
•
The flash output setting is memorised even if the camera is turned off.
•
The flash output adjustment cannot be used while in [FLASH BURST] in scene mode.
Advanced (Recording pictures)
Wide
in scene mode, the ISO sensitivity automatically switches to between
(P73) in scene mode, the ISO sensitivity automatically switches to between

Adjust the flash output

j 2 EV] to [ i
Available flash range
30 cm to 2.9 m
30 cm to 90 cm
30 cm to 1.3 m
40 cm to 1.8 m
60 cm to 2.6 m
90 cm to 3.7 m
2 EV] in steps of [1/3 EV].
- 55 -
Tele