Selecting A Single Picture And Printing It - Panasonic LUMIX DMC-FX180 Operating Instructions Manual

Note
•
Do not use any other USB connection cables except the supplied one.
Use of cables other than the supplied USB connection cable may cause malfunction.
•
Turn the camera off before connecting or disconnecting the AC adaptor (optional).
•
Before inserting or removing a card, turn the camera off, and disconnect the USB connection
cable.
•
You cannot switch between the built-in memory and the card while the camera is connected to
the printer. Disconnect the USB connection cable, insert (or remove) the card and then connect
the USB connection cable to the printer again.
1
Press 2/1 to select the picture and then press
[MENU/SET].
•
The message disappears in about 2 seconds.
2
Press 3 to select [PRINT START] and then press
[MENU/SET].
•
Refer to P136
print the pictures.
•
Press [MENU/SET] to cancel printing halfway.
•
Disconnect the USB connection cable after printing.
Connecting to other equipment

Selecting a single picture and printing it

for the items which can be set before starting to
- 134 -