Focus Adjustment; Keystone Correction - Sanyo PLC-XE50A Owner's Manual

Focus Adjustment

Adjust the lens focus with the focus lever.

Keystone Correction

If a projected picture has keystone distortion, correct the
image with the Keystone function.
Press the KEYSTONE button on the remote control. The
keystone dialog box appears. Correct keystone distortion
with the Point buttons. Keystone adjustment can be
ed
stored (p.44).
Reduce the upper width
with the Point button.
e
Reduce the lower width
with the Point button.
d
Focus Lever
•The arrows are white when there is no correction.
•The direction of the arrow which are being corrected
turns red.
•The arrows disappear at the maximum correction.
•If you press the KEYSTONE button on the remote
control once more while the keystone dialog box is
being displayed, the keystone adjustment is canceled.
•The adjustable range can be limited depending on the
input signal.
•The projected picture may fluctuate momently
depending on the keystone adjustment.
•"Keystone" disappears after 4 seconds.
/
Remote Control
KEYSTONE button
POINT ed buttons
Basic Operation
23 23