Sanyo PLC-XE50A Owner's Manual page 42

Video Input
Sharpness
Press the Point button to decrease the sharpness of the
7
image; press the Point
of the image (from 0 to 15).
Gamma
Use the Point buttons to adjust the gamma value to get
7 8
better balance of contrast (from 0 to 15).
Noise reduction
Noise interference on the screen can be reduced. Select
one of the following options to get smoother images.
Off......... Disabled.
L1 ......... Lower reduction
L2 ......... Higher reduction
Progressive
An interlaced video signal can be displayed in a progressive
picture. Select one of the following options.
Off.........Disabled.
L1......... For an active picture.
L2......... For a still picture.
Film...... For watching a film. With this function, the
projector reproduces pictures faithful to the
original film quality.
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
"Yes. " All adjustments return to their previous figures.
Store
To store the adjusted data, select Store and press the
SELECT button. Select a level from Image 1 to 4 with
the Point buttons and press the SELECT button. A
ed
confirmation box appears and then select "Yes. "
Stored data can be called up by selecting "Image" in the
Image Level Selection on page 39-40.
Quit
Exit the Image Adjust Menu.
✔Note:
•Noise reduction and Progressive cannot be selected
when 480p, 575p, 720p, 1035i, or 1080i is selected
(p.38).
42
button to increase the sharpness
8
Store
item
Image Level Menu
Move the red frame pointer to
an image item to be set and
then press the SELECT button.
A confirmation box
appears and then
select "Yes. "