Sanyo LED-32XR10F Instruction Manual page 11

Connecting a USB device
To USB port
Connecting Headphones
Headphones
Connecting a MP3 player
MP3 player
TV Rear
MUSIC/AUDIO
RS-232 HDMI 1 HDMI 2 PC IN
Connecting a digital sound system
Optical
cable
Digital sound system
S/PDIF IN
(optical)
Connections
Insert your USB device into the USB port.
To play from the USB device:
1. Turn on your TV, then press SOURCE button. The Input Source
TV Side
menu opens.
2. Press 5
or6
Never remove the USB device or turn off the TV while using the USB device.
To connect headphones:
Insert the plug of the headphone into the TV's Headphone jack.
When using headphones, adjust the headphone volume so as to avoid
excessive levels, as hearing damage may result.
TV Side
Insert MP3 player headphone plug into the MUSIC jack on the back of
the TV. Be sure to insert fully, otherwise it may not sound right.
To listen to music from MP3 player through TV
1. Turn on your TV, then press SOURCE button. The Input Source
menu opens.
2. Press5
3. Turn on your MP3 player and begin playing music. Refer to the
instructions that came with the MP3 player.
D-Sub
For a full Home Theater sound experience, you must connect your
digital sound system to the S/PDIF OUT(
TV rear.
TV Side
Note:
To connect to the S/PDIF OUT (Mini-TOSLINK) jack, a Mini-
!
TOSLINK adapter is required to connect an Optical Cable to
this jack.
Or
The headphone output and S/PDIF OUT share the same jack. So
!
when you want to use S/PDIF, please disconnect your headphone,
and vice versa.
(Continued)
to select USB, then press OK to confirm.
or6 to select Music, then press OK to confirm.
Mini-TOSLINK ) jack on the
11