Important Safety Instruction - Sanyo DMP-P3 Instruction Manual

IMPORTANT SAFETY INSTRUCTIONS
1.) Read these instructions. Keep these instructions. Follow all instructions. Heed
all warnings.
2.) Install this unit in accordance with the manufacturer's instructions.
3.) Only use attachments / accessories / replacement parts specified by the
manufacturer.
4.) Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the unit.
5.) When a cart is used, use caution when moving the cart/unit combination to
avoid injury from tip-over.
6.) Do not install this unit near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
7.) The unit shall not be exposed to dripping or splashing water and no object filled
with liquids, such as vases, shall be placed on the apparatus.
8.) Do not use this apparatus near water and clean the unit with dry cloth only.
9.) Disconnect the unit from the power source when cleaning.
10.) No naked flame sources, such as lighted candles, should be placed on the unit.
11.) Keep the player clean and never store it next to a heat source or in dirty, humid
or wet places. Keep it out of direct sunlight.
12.) Do not block any ventilation openings; the ventilation should not be impeded by
covering the ventilation openings with items, such as newspapers, table-cloths,
curtains, etc. Give minimum 10cm distance around the apparatus for sufficient
ventilation.
13.) To prevent fire or shock hazard, do not expose this unit to rain or moisture.
14.) Do not subject the product to harsh impacts. Do not drop the appliance. This
may result in damage to the product and loss of data.
15.) Care is required with the use of this apparatus in tropical and/or moderate
climates.
16.) Press the player's buttons gently. Pressing the buttons or the screen too hard
can damage the unit.
17.) Do not use the player in an extremely dry environment, as this can lead to static
discharge which can damage the player.
18.) If the unit experienced a crash due to a strong electromagnetic field or by other
interference, please switch off the mains and disconnect unit from with the main
power supply for a few minutes. Reconnect the unit with the power supply to
reset the unit software, the unit will return to normal operation.
19.) To prevent fire or shock hazard, do not use this plug with an extension cord,
receptacle or other outlet unless the blades can be fully inserted to prevent
blade exposure.
20.) Unplug this unit during lightning storms or when unused for long periods of
time.
21.) Where the MAINS plug is used as the disconnect device, the disconnect device
shall remain readily accessible.
-1-