Maintenance - Central Pneumatic 94803 Assembly And Operating Instructions Manual

1. Make sure your Impact Wrench is disconnected from the air hose before attempting
any maintenance.
2. Wipe the Impact Wrench down with a lint free cloth after each use.
3. Make sure the Anvil (33) is clear of dirt or debris. If possible, spray it with compressed
air before each use.
4. If you do not use an inline oiler/filter system, lubricate the tool daily by holding it so that
the Air Inlet (10) is facing up. Squeeze the Trigger (11), and place one or two drops of
oil into the Air Inlet (10). Squeezing the Trigger (11) allows the oil to circulate in the
motor.
Left Valve Knob
Push Knob in for REVERSE
SKU 94803 For technical questions, please call 1-800-444-3353

Maintenance

FIGURE 1
Valve Knobs
(3)
FIGURE 2
Turn the Valve Knob (3) for more air flow and more power.
Trigger (11)
Air Inlet
(10)
Anvil
(33)
Right Valve Knob
Push Knob in for FORWARD
REV 09d
Page 6