To Record Special Cds And Tracks (Cd Manager Function) - Panasonic SC-AK14 Operating Instructions Manual

A
Front side
Reverse side
The interrupted track is re-recorded in its entirety on the
reverse side.
1
5
1
2
3
4
5
24
RQT5539
1 2 3 4 5
9 8 7 6 5
3
2
4
Recording from compact discs
To record special CDs and tracks
(CD Manager function)
This function makes it easier for you to select special CDs and tracks
from amongst those loaded in the player.
•
While recording, if a track is cut off in the middle at the end of the front
side, it is re-recorded from the beginning, on the reverse side.
•
At the end of the reverse side recording stops and the current
track will be interrupted.
Before recording
Prepare the tape you want to use. Perform step 1 on page 23.
Press [CD].
1
Press [CD MANAGER] to select the desired mode.
2
Every time you press the button:
1-TRACK 1-DISC 1-ALL
NORMAL
(OFF)
1-TRACK: Only one particular track is recorded.
1-DISC: The tracks on only one particular disc are recorded.
1-ALL: The same track numbers on each of the CDs are
recorded in succession.
(NORMAL: The original display is restored in about 3 seconds.)
Press [(CD 1) ~ (CD 5)] to select the disc you want.
3
Note
This step is not required if 1-ALL was selected in step 2.
g g g g /( ( ( ( ( ] or [) ) ) ) /f )
Press [g
4
track.
Note
This step is not required if 1-DISC was selected in step 2.
Press [a REC/STOP] to start recording.
5
To stop recording
•
To add a 4 second silent interval before stopping
Press [L]. The CD will stop automatically too.
•
To stop recording without a silent interval
Press [a REC/STOP]. The CD will stop automatically too.
A
f ] to select the desired f f f