White Balance Bracket; Setting The Light Sensitivity - Panasonic Lumix DMC-G10K Operating Instructions Manual

Advanced (Recording pictures)
Bracket setting is performed based on the adjustment values for the white balance fine
adjustment, and 3 pictures with different colours are automatically recorded when the
shutter button is pressed once.
Finely adjust the white balance in step 2 of the
"Finely adjusting the white balance" procedure,
and rotate the rear dial to set the bracket.
Rear dial right: Horizontal (A to B)
Rear dial left: Vertical (Gi to Mj)
Press [MENU/SET].
•
You can also use the rear dial to set.
Note
•
[ ] is displayed in white balance icon in the screen when the White Balance Bracket is set.
•
The White Balance Bracket setting is released when the power has been turned off (including
Sleep Mode).
•
Pictures can be taken with White Balance Bracket regardless of the drive mode settings.
•
You will only hear the shutter sound once.
•
White Balance Bracket cannot be set when the [QUALITY] is set to [
•
White Balance Bracket will be disabled when the Multi Film Bracket is set.
•
White Balance Bracket does not work when recording motion pictures.
[REC] mode:

Setting the Light Sensitivity

This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure
enables pictures to be taken even in dark places without the resulting pictures coming out
dark.
Press 3 (
Press 3/4/2/1 to select the ISO sensitivity and
then press [MENU/SET] to set.
•
You can also use the rear dial to set.
•
You can also press the shutter button halfway to set.
80
VQT2S74

White Balance Bracket

).
], [ ], or [ ].