Panasonic Lumix DMC-G10K Operating Instructions Manual page 102

Advanced (Recording pictures)
Press the shutter button fully to stop recording.
•
Sound will be heard when pressing the shutter button fully indicating start/stop of motion
picture recording.
Sound volume can be set in [BEEP] (P32).
•
If the card becomes full in the middle of recording, the camera stops recording
automatically.
∫ About the flicker reduction function
If there is marked flicker or striping when recording motion pictures, the Flicker Reduction
Function can be set to [ON].
1
Press [‚].
•
The Flicker Reduction Function will be forcefully activated, and the shutter speed will be
adjusted to 1/120.
2
Rotate the rear dial.
•
It is possible to select the shutter speed to adjust from 1/50, 1/60, 1/100, or 1/120, and
adjust to the optimal setting while viewing the screen.
•
When Intelligent Auto Mode is selected in step
subject or recording situation can be performed.
∫ Scene detection
When the camera identifies the optimum scene, the icon of the scene concerned is
displayed in blue for 2 seconds, after which its colour changes to the usual red.
[i-PORTRAIT]
>
¦
[i-SCENERY]
[i-LOW LIGHT]
[i-MACRO]
•
[ ¦ ] is set if none of the scenes are applicable, and the standard settings are set.
•
When [ ] is selected, the camera automatically detects a person's face, and it will adjust the
focus and exposure. (Face Detection) (P71)
Note
•
Refer to P42 for settings in Intelligent Auto Mode.
•
Due to conditions such as the ones below, a different scene may be identified for the same
subject.
–
Subject conditions: When the face is bright or dark, The size of the subject, The colour of the
subject, The distance to the subject, The contrast of the subject, When the subject is moving
–
Recording conditions: Sunset, Sunrise, Under low brightness conditions, When the camera is
shaken, When zoom is used
102
VQT2S74
When set to Intelligent Auto Mode
1
, motion picture recording matching to the